欢迎光临山东墨源数控设备有限公司官网为您提供:保丽龙雕刻机,五轴保丽龙刻机,四轴保丽龙雕刻机

NEWSCENTER
新闻资讯
联系我们

18560023440

王经理:18560023440
地址:山东省德州市齐河县经济开发区齐众大道7号-2车间

新闻资讯 当前位置:首页 - 新闻中心 > 新闻资讯

不同型号的开料机日常保养事项

来源:http://www.jmycnc.com 时间:2021-12-04 

大家都知道,雕刻机,开料机,木工雕刻机,立体雕刻机,铝材雕刻机,木雕机,木门加工,木工加工,五轴加工在日常使用中经常会遇到各种大小的毛病与问题,维修起来也非常的麻烦,那么要想雕刻机各部件始终保持良好的状态,经常对机器的维护和保养是十分重要的,可以把很多故障隐患消灭在萌芽之中,防止恶性事故发生。不同型号的雕刻机日常保养的内容要求不完全一样,但总的来说包括以下几个方面:
As we all know, engraving machine, cutting machine, woodworking engraving machine, three-dimensional engraving machine, aluminum engraving machine, wood engraving machine, wood door processing, woodworking processing and five axis processing often encounter various problems and problems in daily use, and maintenance is also very troublesome. If you want to keep all parts of the engraving machine in good condition, Regular maintenance of the machine is very important. It can eliminate many hidden troubles in the bud and prevent malignant accidents. The daily maintenance requirements of different models of engraving machines are not exactly the same, but generally speaking, they include the following aspects:
1、机器要放置在干燥通风好的地方(防止暴晒)
1. The machine shall be placed in a dry and well ventilated place (to prevent exposure to the sun)
2、机器配置一台可靠稳压器,保证地线接地
2. The machine is equipped with a reliable voltage regulator to ensure grounding
3、尽量不用上网电脑输出文件到雕刻机
3. Try not to use the Internet to output files to the engraving machine
4、机器每隔一个月要保养一次(在丝杆上加适量的润滑油)
4. The machine shall be maintained every other month (add an appropriate amount of lubricating oil on the screw rod)
5、控制箱要放置在通风良好的地方,不能置于高温地带工作
5. The control box shall be placed in a well ventilated place and shall not be placed in a high temperature area
6、在一定时间内检查一下雕刻机线路是否有松动
6. Check whether the circuit of the engraving machine is loose within a certain time
7、不要在雕刻机台面或机头放置杂物(带有磁性材料、超重量物品、液体)
7. Do not place sundries (with magnetic materials, overweight objects, liquids) on the table or head of the engraving machine
8、不要让机器常时间在雕刻机台面的同一角落工作(以防丝杆、导轨常时间没与横梁接触而不能合理润滑)
8. Do not let the machine work at the same corner of the engraving machine table for a long time (in case the screw rod and guide rail do not contact the beam for a long time and cannot be reasonably lubricated)
9、保持良好的润滑状态,定期检查、清洗丝杠,添加或更换油脂油液,使丝杠、螺母等各运动部位始终保持良好的润滑状态,以降低机械的磨损速度。
9. Maintain good lubrication status, regularly check and clean the lead screw, add or replace grease and oil, so as to keep all moving parts such as lead screw and nut in good lubrication status, so as to reduce the wear speed of machinery.
电脑和控制箱如果太脏,粉尘太多,会影响雕刻机的正常运行。控制箱里太脏,有可能发生短路现象烧坏驱动器。定期进行清扫卫生,保持主板和各类卡的通风干燥。
If the computer and control box are too dirty and dusty, it will affect the normal operation of the engraving machine. If the control box is too dirty, there may be a short circuit and burn out the driver. Clean regularly and keep the main board and all kinds of cards ventilated and dry.
主轴电机的保养
Maintenance of spindle motor
为了能够更长、更稳定地使用主轴电机,应注意以下几点:
In order to use the spindle motor longer and more stably, pay attention to the following points:
1、三天换一次水 2.定期加油3、保持轴承润滑  4、不能有水进入电机
1. Change the water once every three days 2. Add oil regularly 3. Keep the bearing lubricated 4. No water can enter the motor
5、保持轴承的清洁 6、可在高转速、强阻力的情况下长期工作。
5. Keep the bearing clean. 6. It can work for a long time under the condition of high speed and strong resistance.
以上就是四工序开料机http://www.jmycnc.com/为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
The above is the four process cutting machine http://www.jmycnc.com/ Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!