欢迎光临山东墨源数控设备有限公司官网为您提供:保丽龙雕刻机,五轴保丽龙刻机,四轴保丽龙雕刻机

NEWSCENTER
新闻资讯
联系我们

18560023440

王经理:18560023440
地址:山东省德州市齐河县经济开发区齐众大道7号-2车间

新闻资讯 当前位置:首页 - 新闻中心 > 新闻资讯

开料机怎么选?

来源:http://www.jmycnc.com 时间:2021-11-09 

根据目前市场情况来看,开料机主要以直排加工为主,其优势在于,直排加工拥有12把刀头,自动换刀,属于一款功能型的开料机,既可以做门板,又可以做柜体,也可以加工多种隐形连接件,后期产量增加,也是对接六面钻的合适机型,性价比比较高,不用担心后期被淘汰。
According to the current market situation, the direct row processing center is the main material opener. Its advantage is that the direct row processing center has 12 cutter heads and automatic tool change. It is a functional material opener, which can be used as both door panels and cabinets, and can also process a variety of invisible connectors. The output increases in the later stage. It is also a suitable model for docking six sided drills, with high cost performance, Don't worry about being eliminated later.
在开料机行业,直排加工的一般在7万到10多万,还有极个别厂家,甚5、6万的直排加工也有。建议客户实地考察,不要因为失去了品质和服务。为什么差别这么大呢?有以下几个方面,一点,生产工艺,同样是设备,床身有的是淬火处理的,有的是不经过淬火处理,由于淬火处理成本比较高,很多厂家都不经过淬火工艺,所以说设备在步,就有了很大的区别,所以造成的问题,也会很严重,床身变形,加工精度不够,切割有振纹,震动大,经常断刀,这都是经常发生,而且一旦发生,也解决不了。
In the cutting machine industry, the price of direct processing centers is generally 70000 to 100000, and there are very few manufacturers, even 50000 or 60000 direct processing centers. It is recommended that customers conduct field visits and do not lose quality and service because of price. Why are prices so different? In the following aspects, the production process is also equipment. Some beds are quenched and some are not quenched. Due to the high cost of quenching, many manufacturers do not go through the quenching process. Therefore, the equipment is very different in the first step, so the problems will be very serious. The bed is deformed and the processing accuracy is not enough, There are vibration marks in cutting, large vibration and frequent knife breaking, which often occur, and once it occurs, it can not be solved.
第二点,开料机有的三吨重,有的只有一吨多,外形都一样,其实差别很大。一般标准的开料机床身,都是用八个厚的方管焊接的,导轨齿条安装面都有加强筋。但是还有很多厂家,用的是五个厚的,甚都不到,这直接影响了开料机的稳定性。有很多做门板的客户,就经常遇到同样的问题,有很明显的接台,怎么调都调不好,只能再换一台设备,一般还第二套设备的客户,因为次被欺骗,或者售后服务不及时,跟不上,就直接不会考虑小厂家的了,直接奔着企业的厂家去。
Second, some of the cutting machines weigh three tons, and some weigh only more than one ton. Their shapes are the same, but in fact they are very different. The general standard cutting machine body is welded with eight thick square tubes, and the mounting surface of guide rail rack is provided with stiffeners. However, many manufacturers use five thick ones, or even less, which directly affects the stability of the slitter. Many customers who make door panels often encounter the same problem. There is a very obvious connection. They can't adjust it well. They can only change another set of equipment. Generally, customers who return the second set of equipment will not consider small manufacturers because they are cheated for the first time, or the after-sales service is not timely and can't keep up. They go directly to the manufacturer of the brand.
开料机
第三点,开料机的配置,配件的好坏直接影响到后期的使用舒适度,当你接到一个大订单时,设备突然出问题了,得等个一两天,三四天,你说你头不头疼?加工了一批板子,因为孔打偏了,到客户安装的时候发现,全装不上,一批板子全废了,客户还要你赔偿,你恼火不恼火?奉劝大家,千万不要因为,失去了品质和服务,更吃亏的还是自己,还是自己来承担后果。
Third, the configuration of the cutting machine and the quality of the accessories directly affect the later use comfort. When you receive a large order, the equipment suddenly has a problem. You have to wait for a day or two, three or four days. Do you say you have a headache? A batch of boards were processed. Because the holes were missed, when the customer installed them, they found that they couldn't be installed. A batch of boards were all abandoned. The customer still wants you to compensate. Are you angry? I advise you not to lose quality and service because of the price. It is you who suffer the most, or you will bear the consequences yourself.
以上这些内容就是关于开料机http://www.jmycnc.com/的相关内容,如果您想要了解更多内容,欢迎联系在线客服,我们必将竭诚为您服务。
The above contents are about the cutting machine http://www.jmycnc.com/ If you want to know more, please contact online customer service, and we will serve you wholeheartedly.