欢迎光临山东墨源数控设备有限公司官网为您提供:保丽龙雕刻机,五轴保丽龙刻机,四轴保丽龙雕刻机

济南光纤切割机,济南木工加工中心,保丽龙加工中心
NEWSCENTER
新闻资讯
联系我们

18560023440

王经理:18560023440
地址:山东省德州市齐河县经济开发区齐众大道7号-2车间

新闻资讯 当前位置:首页 - 新闻中心 > 新闻资讯 >

双工序开料机开出的板材崩边解决方法

来源:http://www.jmycnc.com 时间:2021-06-09 

在使用双工序开料机加工板材的时有时候会遇到一种问题——加工出来的板材崩边。那么这个问题到底是什么原因造成的呢?有什么好的办法可以避免出现这种情况?
When using the numerical control cutting machine to process the plate, sometimes we will encounter a kind of problem - the edge collapse of the plate. So what is the cause of this problem? What's a good way to avoid this?
1、板材材质原因
1. The reason of the plate material
在开料中常用的板材有密度板和刨花板。这两种板材硬度高、成本低和易加工等原因被广泛应用板式家具生产当中。但是这两种板材有同一个缺点,那就是这两种板材都是压制而成,如果粘结力度不强的话,开料的时候就容易崩边,所以这就需要我们在选购板材时多注意。
Density board and particleboard are commonly used in cutting. These two kinds of boards are widely used in panel furniture production because of their high hardness, low cost and easy processing. But these two kinds of plates have the same disadvantage, that is, these two kinds of plates are made by pressing, if the bonding strength is not strong, it is easy to collapse when cutting, so we need to pay more attention when purchasing plates.
双工序开料机
2、刀 具的锋利度原因
2. The reason of tool sharpness
数控开料机开料是用刀 具开料的,刀 具的锋利度直接就影响到开料表面的粗糙程度。如果刀 具的锋利程度不强,那么开出来的板材就会出现崩边,所以需要在使用数控开料机时注意刀 具的磨损程度,及时更换刀 具。
CNC cutting machine is cutting with cutting tool, the sharpness of the cutting tool directly affects the roughness of the cutting surface. If the sharpness of the cutting tool is not strong, then the plate will appear edge collapse, so we need to pay attention to the wear degree of the cutting tool when using the CNC cutting machine, and replace the cutting tool in time.
3、主轴转速原因
3. Cause analysis of spindle speed
数控开料机的主轴转速好坏直接影响加工效果,如果主轴转速不够的话,开出来的板材就非常有可能出现崩边。
The spindle speed of CNC cutting machine has a direct impact on the processing effect. If the spindle speed is not enough, the plate is likely to have edge collapse.
4、刀 具装夹不牢固
4. Tool clamping is not firm
刀 具装夹不牢固,在加工产品的过程中会造成板材的崩边和刀 具的损坏。
Tool clamping is not firm, in the process of processing products will cause plate edge collapse and tool damage.
5、有的厂家生产的开料机他的真空吸附台面吸附能力不是很强,在加工产品的时候工件吸附不牢靠,造成板材的移位,这也是造成板材崩边的原因。
5. The vacuum adsorption table of the cutting machine produced by some manufacturers has not strong adsorption capacity. When processing products, the workpiece is not firmly adsorbed, resulting in the displacement of the plate, which is also the cause of the plate edge collapse.