欢迎光临山东墨源数控设备有限公司官网为您提供:保丽龙雕刻机,五轴保丽龙刻机,四轴保丽龙雕刻机

济南光纤切割机,济南木工加工中心,保丽龙加工中心
INFORMATION
业内资讯
联系我们

18560023440

王经理:18560023440
地址:山东省德州市齐河县经济开发区齐众大道7号-2车间

业内资讯 当前位置:首页 - 新闻中心 > 业内资讯 >

济南雕刻机的主轴电机是水冷的好还是风冷的好?

来源:http://www.jmycnc.com 时间:2021-06-02 

济南雕刻机的主轴电机是水冷的好还是风冷的好?对于这个问题,很多客户都有疑问,在这个问题上,我们简单介绍一下:首先来认识一下两者的共同点:在内部结构来说,二者是统一的,都是采用定子绕线圈转动;从电机的控制方式来说,水冷的几乎都是变频控制的,风冷主轴则不然,可以采用变频和不变频的方式控制。水冷主轴和风冷主轴的区别:
Jinan engraving machine spindle motor is water-cooled or air-cooled good? For this problem, many customers have doubts. On this issue, let's give a brief introduction: first, let's understand the common points of the two: in terms of internal structure, the two are unified, and both use the stator to rotate around the coil; From the control mode of the motor, the water-cooled spindle is almost controlled by frequency conversion, but the air-cooled spindle is not. It can be controlled by frequency conversion or non frequency conversion. Difference between water-cooled spindle and air-cooled spindle:
一、水冷顾名思义就是采用水循环来冷却主轴高速旋转后产生的热量,这样的效果就会很好,因为水经过流通之后的温度(常用测试)不会超过40度;风冷的主轴采用风扇的方式来散热,其效果肯定不如水冷;
济南雕刻机
1、 Water cooling, as the name suggests, is to use water circulation to cool the heat generated by the high-speed rotation of the spindle, so the effect will be very good, because the temperature of water after circulation (commonly used test) will not exceed 40 degrees; The air-cooled spindle uses fan to dissipate heat, and its effect is certainly not as good as water cooling;
二、噪音,水冷的主轴基本上没有噪音,但是风冷的主轴则很响;
2、 Noise, water-cooled spindle basically no noise, but the air-cooled spindle is very loud;
三、使用寿命,水冷主轴要注意保养、勤换水或者采用工业水冷却机,这样的主轴寿命要比风冷主轴长很多!
3、 Service life, water-cooled spindle should pay attention to maintenance, frequently change water or use industrial water cooler, such spindle life is much longer than air-cooled spindle!
四、精度,水冷主轴轴向、径向跳动基本上都是在0.003毫米以下,而风冷主轴(国产)则远远不及。
4、 Accuracy, axial and radial runout of water-cooled spindle are basically below 0.003 mm, while air-cooled spindle (made in China) is far less than.
以上就是小编为大家介绍的关于雕刻机的相关内容,希望可以帮助到大家。更多精彩内容可以直接关注:http://www.jmycnc.com
The above is Xiaobian for you to introduce the relevant content of engraving machine, hope to help you. More highlights can be directly focused on: http://www.jmycnc.com